1988 Tiara 3600 open express offshore ** free r.i. slip & delivery Express in Central Coastal, RI

SELLER DESCRIPTION

1988 Tiara 3600 Open Express Offshore ** Free R.I. Slip & Delivery within 500 Miles ** 36, A true offshore platform fully rigged and totally up to date. No mechanical or electrical upgrades needed on this turn key sportfishing machine

Additional Equipment:
Engine room was cleaned, painted and rewired. Two coats of silent running acoustical coating were applied to all engine room surfaces and then over coated with white Interlux bilgekote. LED lighting installed in engine room. Installed new holding tank, vaccuflush vacuum tank and switch, sanitation plumbing and macerator pump for overboard discharge. RI DEM inspection for No-Discharge Compliance certification for Marine Sanitation Device (MSD) valid through 2012. Potable water tank was replaced with new custom made 80 gallon aluminum tank. New 10 gallon hot water heater installed. All raw water sea strainers serviced. Plastic thruhull fittings were replaced with bronze. All thruhull fittings inspected and new hoses installed with double AWAB hose clamps. Helm station was alwgripped and rewired with all new switches, circuit breakers and wire harnesses with custom made electrical panels by Common Ground Inc. New live well aeration pump and LED lighting. New macerator pump for live well and bait box evacuation. Bottom paint was sanded to original coating and two new coats of Micron CSC were applied. No osmotic blistering present on the bottom. All the running hardware was replaced at the end of the 2005 season. Two new Michigan Wheels DJX style NiBrAl propellers. Two new AQUAMET-22 stainless steel shafts with new transmission couplings and cutlass bearings (two per side). Cosmetic improvements in 2005 included all new 4-sided custom canvas enclosure. New custom helm seats made. New teak covering boards and under gunnels LED courtesy lighting. Four new Lees heavy duty swivel base rod holders installed in the gunnels in 2005. Eight rocket launcher rod holders on tower. Pipewelder double spreader outriggers have been re-rigged with new stainless steel spreader cables (2007) and solid core braided nylon running lines with AFTCO roller roller release clips. This boat is fish ready and a proven offshore capable fishing platform.