2007 Beneteau 343 Cruiser (sail) in Rochester, NY

• View Photos
• Watch Boat Clips

SELLER DESCRIPTION

Like New, Shoal (4'7") Draft Keel, Roller Furling, In-Mast Mainsail Furling w/ Vertical Battens, ST-60 Tri-Data, ST-60 Wind Machine, C-70 GPS/Chart, Raymarine S1 Wheel Pilot, Ellis Mist Upgraded Upholstery, Custom Bimini, Stern Rail Seats, 87.5 Hrs on Yanmar 3YM Diesel, 3 Blade Flexifold Folding Prop (2008)Designed by Berret-Racoupeau, the all-new Beneteau 343 is a sophisticated, comfortable cruiser incorporating a voluminous interior filled with an abundance of light and ventilation. A wonderful, spacious cockpit offers a patented innovative pivoting steering wheel allowing easy access from the helm to companionway. The 343 has a long list of standard options that give this 34-footer incredible value that the competition will find difficult to surpass.

Galley:
Headroom: 6.5 ft.Laminated counter top with molded wood fiddle.Stainless steel sink.Mixer tap with hot/cold pressurized water.Gimbaled two-burner propane stove with oven.1 x 12V electric (4.5 Cu ft) front opening fridgeChart table to starboard, with molded wood fiddle.Radio/CD Player with two speakers in salon.Instrument space on bulkhead facing the table.Drawer.Locker.Halogen ceiling light.

Deck and Hull Equipment:
ENVIRONMENTALLY FRIENDLY: All the gel coat and resin products used by Beneteau today are low-styrene and MACT compliant. Beneteau also recycles and re-uses all the acetone used during production.HULL: Hand-laid solid G.R.P. hull with a directional fiberglass/G.R.P structural hull liner. The hull is laid up with a vinylester barrier coat to resist osmotic blistering, followed by a zone-specific stitchmat laminate schedule to meet the specific strength requirements of each different section of the hull. The hull liner is laminated using high-strength non-woven stitchmat fiberglass and unidirectional rovings to achieve maximum structural distribution of all loads and forces while controlling weight. The completed hull and hull liner are bonded together using a proprietary polyester adhesive compound that chemically links the parts together.DECK: Cored sandwich construction for stiffness, thermal and acoustic insulation and lighter weight. Solid fiberglass reinforcements are located in high load and hardware mounting locations. Unidirectional roving reinforced deck beams integral to the deck liner lamination are bonded to the deck for added strength.BULKHEADS: are bonded 360 to the hull and deck for structural strength.

Sails and Rigging:
Raymarine ST60 Tridata, Knotmeter, Depthsounder, LogICOM IC-M402 VHF Marine Radio with DSCStern Rail SeatsSONY AM/FM Stereo with CD PlayerHot & Cold Cockpit Shower110 Volt Shore Power Cord