eGlobalYachts.com
79 Chesterfield Road
Amston,
CT 06231 (Map)
See All Inventory
News
News
Press
Press
Boat Trader Blog
Boat Trader Blog
Weather, Boat & Beach Report
Weather, Boat & Beach Report
Ready to buy that Yacht?
Find out what it's worth
Accomodations:
Cabin will be furnished with beds, cupboards and whatever seen on the plans, material like bed sheets, curtains and soft material is not included in yard delivery program TV,VCD,Stereo included Doors , walls,etc completed and vessel basically ready for charter
Galley:
Galley delivered with working area ,1 unit 4 flame gas burner Water tabs and connections in all areas completed.
Electonics and Navigational Gear:
1 unit Depth Sounder, 1 unit VHF, 1 unit GPS
Electrical System:
Vessel consists of 12 and 220V shore connection. All living areas inside have 12 and 220V lightening. A minimal set of international Navigation Light is included on the vessel. All areas like as engine room , WC , Galley , deck have light 12 and 220V too.
Deck and Hull Equipment:
Wood material of frame is: Pine Deck to be covered with marine Ply and covered with mahogany
Additional Equipment:
All changes can be done according to the customer?s preferences. Twin engine, The H.p. or any other details on the plan can be changed. The material used in bathroom, WC or in galley can be ceramic tiles or any other material.
2008 JUNIOR MARINE/JRM SPEED BOAT, Constructing Details: The keel is 12 x 10 cm. (laminated pine -epoxy covered-5 coats), Wood material of frames are pine, The upper frames are 8 x 4 cm., The lower frames are 4.5 x 2.5 cm., The Planking; (side planking above main deck and above waterline and the material of underwater line), 1st coat - 8 mm. marine plywood, glued to frames by epoxy and screws. Then covered by epoxy again. 2nd coat-8 mm. marine plywood. affixed to the first planking by epoxy and screws. Then covered by epoxy again. 3rd coat-epoxy fibres covered. Then sanding and cleaning 4th coat - laminated mahogany covered-12 mm. The Deck to be covered with 15 mm marine plywood and covered with 20 mm. Teak or Mahogany-according to the customer's preference and white rubber or wood fastened and epoxy of 5 mm in between both coats of deck materials. The material of the interior cabin walls marine plywood and All floors to be covered with Mahogany or Teak, white rubber or wood fastened ,too . 06/30/06 The builder has just finished the frames and the connection of the interior strings of the boat which connects all the frames to each other. Now they are on the planking stage. Not only the second hand engines are available, the brand new of any other engine is possible. Also, there are some extra options. The builder can put ice maker, A/C, or any extra the customer wants (Even a bigger one can be constructed). The builder just has to be informed about the details that the customer requires. The delivery time of this boat: Without a customer it will finish in 1.5- 2 months. The builder is working on multiple vessels. With a customer it will finish in 20-25 days. The customer can choose not only the soft material, but also the design of the cockpit or the inside. For example, the cockpit can have a bench seat as it is seen in the pictures or can have a half circle seat. Or can have a shower at swimming platform or inside etc. A general arrangement plan of this boat is available. The customer can make some changes on it and write the details of everything.
79 Chesterfield Road
Amston,
CT 06231 (
Map )
***Please contact us at (888) 398-8634 to inquire about the location of the vessel that you are interested in.***
;)
;)
;)
;)
;)
;)
